The great leaps of v1.11: Massive refuelling improvements

March 7, 2016 · Posted in Command · Comment 

F15A2ARThe v1.10 update for CMANO was released on Feb 26 to widespread acclaim. The dev team is already hard at work preparing the next upcoming major release, version v1.11. After the panoply of new features in past updates, what new tricks do the CMANO devs have up their sleeves? Let’s take a peek.


Massive Air-to-Air Refueling (A2AR) improvements

Air-to-air refueling (A2AR) has been given a complete overhaul. There are significant improvements to the AI’s decision making processes and it is a lot smarter about when and where to refuel. Furthermore, the player is given the ability to manually select which tanker(s) to refuel from, and there are additional options in the Mission Editor to control tanker usage. Tankers will also tell the player which receivers are currently queued for refueling, and display the number of aircraft served thus far. Further super-specialized A2AR improvements are planned for integration into the Advanced Strike Planner, such as ‘refuelling waypoints’, but we believe the current tanker functionality will satisfy 99% of Command players’ needs.

Many players have told us the thing they have missed the most is the ability to manually select which tanker their aircraft should refuel from. You now have three choices:

– Automatic, which is the same behavior as earlier, i.e. the AI picks the most suitable tanker based on remaining fuel and shortest rendezvous time.

– Manual, simply click on the tanker you want to refuel from.

– From mission, pick the most suitable tanker from the tankers assigned to the specified support or ferry mission.

A2AR3(Click on image for full view)

The improved Mission Editor has several new settings for configuring tanker usage. A new window called the ‘Tanker Planner’ allows the player to set the conditions for when tanking should be attempted when the aircraft are in the air, and also set launch conditions for the mission itself. The parameters are as follows:

Use nearest tanker with enough fuel to serve receivers: Airborne receivers assigned to this mission will pick the most suitable tanker based on remaining offloadable fuel and shortest rendezvous time.

Use tankers assigned to specific missions: Limit the tanker pick to those assigned to given missions only. When combined with the new mission Startup and Termination functionality along with the Support Mission ‘One refueling cycle’ and ‘Number of receivers’ limitations (explained below), the player now has the ability to do pretty detailed tanker planning.

Mission planning details – Minimum number of tankers needed: Specify the minimum number of tankers needed to launch this mission. In some cases, especially for larger air strikes, you may need a minimum amount of fuel (2,000,000 lb, hah!) and this setting allows you to postpone strike missions if the tanker requirements cannot be met.

Mission planning details – Minimum number of tankers airborne: Same as above, but specifies the minimum number of tankers that have to be in the air rather than just available.

Mission planning details – Minimum number of tankers on station: This is a further refinement of the above settings and specifies the number of tankers that must be on-station. It only applies to tankers assigned to support missions. Ferry missions are ignored.

Mission planning details – Launch mission without tankers in place (Extremely risky!): The description says it all. In some cases it is desirable to launch a mission without having tankers within tactical radius of the target. Especially in high-threat environments. This setting allows the player to override all built-in safety measures and just launch the strike aircraft regardless of tanker availability at the moment. The aircraft will of course attempt to refuel when airborne, however on the ingress leg they will only attempt to hook up with tankers ahead of them, not behind. Thus it is up to the player or scenario designer to make sure tankers get into position before the receivers run out of fuel and crash. (Dev note: on the return leg, strike aircraft will also look for tankers behind them so the requirements are not so strict there).

Mission execution details – Maximum number of receivers in queue per tanker: In order to prevent one tanker from accepting too many receivers, the player can specify the maximum number of aircraft to send to each tanker.

Mission execution details – Receivers start looking for tankers when down to X percent of mission fuel: By default, strike aircraft will start looking for tankers when down to 85 percent of mission fuel, and aircraft on patrol missions will attempt to refuel when reaching 60 percent. This works well in most cases. However, sometimes it is desirable to delay the search for tankers, and this is a super-nerdy way of doing just that. The setting works for all mission types including Ferry missions. A prettier way to do it is to use the setting below:

Airborne receivers can book tankers within…: When aircraft are down to the fuel percentage specified above, they start looking for tankers. The default is to pick a tanker within the receiver’s tactical range (i.e. strike radius multiplied by two, minus fuel already burned), but the player can also decide that aircraft should only look for tankers within a certain radius.

A2AR1(Click on image for full view)

It is our experience that most players use Support Missions for tanker stations. In order to improve tanker ops flexibility and realism, Command v1.11 adds user-configurable mission termination time (in addition to mission activation time found in earlier versions of the simulator). This allows the player to minimize the tankers’ exposure to threats by de-activating the mission and force them to go home. In addition, the updated Mission Editor adds the ability to make tankers return to base when they have conducted one refueling cycle, or when a specified number of receivers have been served:

Tankers return to base after one refueling cycle, when queue is empty: Tankers will remain on-station for as long as there are receivers in the tanker’s receiver queue. The tankers will accept refueling requests from additional receivers for as long as there is enough fuel, and once all aircraft in the queue have been served the tankers will return to base. This ensures the tankers will only stay on station for as long as they are needed.

Tankers can refuel maximum X receivers, rounded up to nearest flight: Tankers will serve a limited number of receivers. This is especially useful when each tanker carries limited amount of fuel, e.g. when using buddy refueling or when refueling strategic bombers. The number is rounded upwards to the nearest flight. I.e. if the maximum number is six receivers, the tanker will accept two flights of four receivers each. This option can be used in combination with the above setting to create very flexible mission termination conditions.

A2AR2(Click on image for full view)

The great leaps of v1.11: Winchester, Shotgun, Bingo, Joker and Chicken

March 4, 2016 · Posted in Command · Comment 

F14The v1.10 update for CMANO was released on Feb 26 to widespread acclaim. The dev team is already hard at work preparing the next upcoming major release, version v1.11. After the panoply of new features in past updates, what new tricks do the CMANO devs have up their sleeves? Let’s find out.


Winchester, Shotgun, Bingo, Joker and Chicken

Winchester and Bingo are well-known brevity calls for “no ordnance remaining” and “low fuel state” respectively. However, in many situations it would make sense for aircraft to begin separation well before they are completely out of weapons or flying on fumes. Command v1.11 adds player-customizable “Shotgun” weapon state and “Joker” fuel state, and even includes the “Chicken” fuel state for emergencies. A quick intro to these terms can be found in the Multiservice tactical brevity code article on Wikipedia and in the Command Mega-FAQ.

FuelWeaponState004

Click on image for full view

All aircraft loadouts now have their own pre-defined Winchester or Shotgun weapon states. The default states depend on loadout role and weapon types, which vary from all-Sidewinder F-16 air superiority loadouts to MiG-31 long-range one-pass intercept loadouts.

In some cases the player may not want to use the pre-defined Winchester or Shotgun settings stored in the database. For instance, a loadout may allow an aircraft to bore in on and engage hostiles with guns. However that may not be desirable in many situations. Therefore, the player can decide to override the default settings through the Doctrine window. Weapon states are inherited like all other Doctrine settings, and can therefore be configured per unit, per group, per mission and/or per side.

FuelWeaponState001

Click on image for full view

There are approximately twenty different Winchester and Shotgun settings to choose from. The first two are normal Winchester weapon states while the remainder are Shotgun setups that allow aircraft to disengage when it is most advantageous to do so. It should be noted that Shotgun states are split into two main categories: those where aircraft will start separation when certain types or quantities of ordnance has been expended, and those that will make aircraft disengage after the engagement is over. The latter is usually preferred, as the aircraft will continue fighting until the enemy has been defeated or the weapon state has been reached, whatever comes first. This means aircraft may go home with weapons left onboard, and will not hang around after an engagement is over, low on fuel and ordnance, and risk getting ambushed by flights of ‘fresh’ bogies. Past experience shows that the latter settings significantly reduces losses to own forces  and has also made the AI a tougher opponent.

The user-selectable Winchester and Shotgun doctrine settings are:

  • Use loadout setting – Uses default weapon state settings from the database, tailored to each loadout’s role and ordnance.
  • Winchester: Mission-specific weapons have been expended. Disengage immediately – The traditional pain vanilla Winchester weapon state.
  • Winchester: Mission-specific weapons have been expended. Allow targets of opportunity with air-to-air guns – Same as above, but engage nearby bogies with guns after we’re out of missiles. Applies to air-to-air missile loadouts only. For guns-only air-to-air loadouts and all air-to-ground loadouts the behaviour is the same as above.
  • Shotgun: All BVR or Stand-Off weapons have been expended. Disengage immediately – Disengage after firing all Beyond Visual Range (BVR, air-to-air) or Stand-Off (SO, air-to-ground) weapons. This is a risky option as your fighter aircraft may only have one medium-range air-to-air missile (AAM) left and then decide to engage ‘fresh’ flights of bandits. Use with caution!
  • Shotgun: All BVR or Stand-Off weapons have been expended. Allow easy targets of opportunity with WVR or Strike weapons. No air-to-air guns – Same as above, but if easy targets or threats are nearby then shoot at them with remaining Within Visual Range (WVR, air-to-air) or SR (Short-Range, air-to-ground) weapons before disengaging. A target has to be within 120% of the WVR/SR weapons’ range to be engaged. Otherwise, the aircraft will turn, go to afterburner, and try to leave the area at max speed.
  • Shotgun: All BVR or Stand-Off weapons have been expended. Allow easy targets of opportunity with WVR or Strike weapons, and air-to-air guns – Same as above, but also engage bogies with guns if given an easy chance. Typically, a target has to be within 5nm and closing to be of any interest. Applies to air-to-air (A/A) loadouts only. For air-to-ground (A/G) loadouts the behaviour is the same as above.
  • Shotgun: One engagement with BVR or Stand-Off weapons. Disengage immediately – Attempt one engagement with BVR or SO weapons. Continue fighting for as long as there are targets within easy reach and then disengage. This is a safe option as it ensures aircraft do not ‘hang around’ after they have expended their most potent weapons, and thus avoid becoming easy targets if engaged by ‘fresh’ enemy units.
  • Shotgun: One engagement with BVR or Stand-Off weapons. Allow easy targets of opportunity with WVR or Strike weapons. No air-to-air guns – Same as above, but if easy targets or threats are nearby, shoot at them with remaining WVR or Short-Range weapons before disengaging. A target is considered ‘easy’ when within 120% of the remaining WVR or Strike weapon’s maximum range (minimum 5nm). In other words, the fighter won’t spend much energy chasing down a bogey after the Shotgun weapon state has been reached, and will leave the target area as quickly as possible.
  • Shotgun: One engagement with BVR or Stand-Off weapons. Allow easy targets of opportunity with WVR or Strike weapon, and air-to-air guns – Same as above, but also engage bogies with guns. Applies to air-to-air (A/A) loadouts only. For air-to-ground (A/G) loadouts the behaviour is the same as above.
  • Shotgun: One engagement with both BVR and WVR or Stand-Off and Strike weapons. No air-to-air guns – Make one engagement with BVR and WVR, or SO and Strike Weapons. Do not disengage when out of BVR or SO weapons, but continue the engagement with WVR weapons.
  • Shotgun: One engagement with both BVR and WVR or Stand-Off and Strike weapons. Allow easy targets of opportunity with air-to-air guns – Follows the above logics.
  • Shotgun: One engagement with WVR or Strike weapons. Disengage immediately – Make one engagement with WVR or SR weapons. Continue fighting for as long as there are targets within easy reach and then disengage.
  • Shotgun: One engagement with WVR or Strike weapons. Allow targets of opportunity with air-to-air guns – Same as above but also engage bogies with guns. Applies to air-to-air (A/A) loadouts only. For air-to-ground (A/G) loadouts, the behaviour is the same as above.
  • Shotgun: One engagement with guns – Make one engagement with guns. Continue fighting for as long as there are targets nearby and then disengage.
  • Shotgun: 25% of relevant weapons have been expended. Disengage immediately – Disengage after 1/4 of mission-specific weapons have been expended.
  • Shotgun: 25% of relevant weapons have been expended. Allow targets of opportunity, including air-to-air guns – Same as above, but if easy targets or threats are nearby then shoot at those too. Also engage bogies with guns (applies to air-to-air (A/A) loadouts only).
  • Shotgun: 50% of relevant weapons have been expended. Disengage immediately – Disengage after half of mission-specific weapons have been expended.
  • Shotgun: 50% of relevant weapons have been expended. Allow targets of opportunity, including air-to-air guns – Same as above, but if easy targets or threats are nearby then shoot at those too. Also engage bogies with guns (applies to air-to-air (A/A) loadouts only).
  • Shotgun: 75% of relevant weapons have been expended. Disengage immediately – Disengage after 3/4 of mission-specific weapons have been expended.
  • Shotgun: 75% of relevant weapons have been expended. Allow targets of opportunity, including air-to-air guns – Same as above, but if easy targets or threats are nearby then shoot at those too. Also engage bogies with guns (applies to air-to-air (A/A) loadouts only).

The Joker fuel state can be set as a percentage of mission fuel, which is max fuel minus reserves. If an aircraft carries 10 000kg of fuel, reserves is typically 10%, which means mission fuel is 9000kg. If the player wants an aircraft to land with 40% mission fuel remaining (3600kg + 1000kg reserve), simply select ‘Joker: 40% above Bingo’.

FuelWeaponState002

In addition to setting the weapon and fuel state conditions, the player may also choose what shall happen when said state is reached. Shall a flight of fighters Return To Base (RTB) when the first aircraft reaches the fuel/weapon state? Last aircraft? Or shall the aircraft disengage and leave their wingmen behind as they run out of weapons and fuel? Or should they not RTB at all? The player now has full control – and responsibility.

FuelWeaponState003

« Previous Page